Thisrapid-start linear fluorescent lamp is a special application bulb manufactured to the highest standards.

• Utilizes blacklight phosphor with a blue glass filter to eliminate visible light
• Fits 4-foot (nominal) linear fluorescent fixtures designed for 40-watt rapid-start (or pre-heat*) T12 lamps
• Energy Cost: $4.82/yr (based on 3hr/day at 11¢/kWh)
• This non-dimmable bulb contains mercury and as such may be subject to local/state disposal regulations
• Life may be impacted when used in single-lamp fixtures, used in fixtures with 40-watt pre-heat ballasts, or when illuminated durations other than 3 hours
• Exposure at less than 0.3 meters (12 inches) should be limited; for example exposure at 0.14m (6 inches) should not exceed 4 hours in an 8 hour interval (see ANSI/IESNA RP-27.1-96). Certain medications and chemicals can increase an individual's sensitivity. Consult your physician for specific information
• Caution: This lamp emits ultraviolet (UV) power during operation and is in Risk Group 1 per ANSI/IESNA RP-27.3-96. Protective eyewear should be worn in occupational situations involving long term exposure in close proximity to the lamp. This lamp is not intended and should not be used for diagnostic, therapeutic, or cosmetic purposes