LED module for use in retrofit/remodel or new construction applications where energy savings, long-life and functional delivered light levels are required. The Reality LED module provides 80% energy savings over the 65W BR30 and replicates the beam pattern and useful light levels of these fixtures.

• Medium base socket adapter included
• Maintains at least 70% light output for 50,000 hours in a typical IC environment
• Fits most common 6" cans for retrofit applications
• Most economical means to create a well lit environment with exceptional energy efficiently and near zero maintenance
• Rugged, one-piece, die cast heat sink design for optimal cooling efficiency.
• The optics are fitted tightly to the housing to reduce the ingress of insects and dust.
• Lower splay recessed optical system into the ceiling to prevent glare and provide a traditional PAR look.
• Twin torsion springs ensure easy installation.
• All electronics are mounted on the module; no access to the junction box is required.
• On board circuitry to ensure protection against wiring errors.
• High efficiency driver mounted on the module. Primary power disconnect provided for simple connection to a standard Edison socket.
• Full range dimming is standard, optimal dimming performance is achieved when connected to an electronic low voltage dimmer
• Lighting module should be installed in applications where ambient temperatures do not exceed 35°C. Ambient temperatures that exceed 35°C will result in reduced lamp life and will void warranty
• Overlap trim: 7.5" 
• CRI: 79

Note: Lighting module should be installed in applications where ambient temperatures do not exceed 35°C. Ambient temperatures that exceed 35°C will result in reduced lamp life and will void warranty.