This recessed can light by Nora Lighting is for use with one 50-watt halogen bulb.

Nora Lighting’s recessed 4" housings deliver ultra-high design quality in any application with minimal apertures ideal for R/PAR20, PAR16 designer light sources. Nora’s 4" remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive trims.

• Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components
• Ceiling Thickness: Ceiling thickness varies from 3/8" – 1-1/4"
• Lamp Adjustment: Socket mounting plate allows slight adjustment to fine tune for best possible light distribution
• Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience.
• Junction Box: Contains two 3/4", three 1/2" knockouts and four ROMEX® pryouts with strain relief
• Electrical: Quick connector provided
• Lamp Max: 50W R/PAR20; 50W PAR16 (actual wattage varies with trim)
• WSEC ASTM E283 for Air-Tight