One metal housing with two shatter-resistant white acrylic face plates for both sides of a stud wall, 3-1/2-in to 4-1/2-in thick. Reduces costs by illuminating two areas with one fluorescent light.

• For indoor and protected outdoor use
• Louvers have linear baffles to direct all light downward
• Open Acrylic - Shatter resistant white acrylic diffusers in white metal frames
• Gasketed for light leak prevention
• Both fasten to housing with torsion springs
• Interior wiring compartment
• 1/2-in KO’s for conduit or BX connections
• Units must be mounted at least 3-in from any insulation
• Brackets for direct mounting to wall board are provided
• The same brackets accept P8716-01 hanger bars, if required, for new construction
• 120v NPF magnetic ballast
• Multiple units can be wired together without the need of separate junction boxes